- New FAROUDJA Progressive Circuit (NTSC/PAL Output)
- Dual 12-bit, 216 Mhz Video Converter
- Discrete Video Output
- Independent Power Supply
- Noise Shaped Video (NSV)
- Super Sub Alias Filter
- Noise Reduction Circuit
- Pure Direct Mode
- AL24 Processing for All Channels
- DENON Link
- Multi Layer Construction
- Digital Bass Management
- Loadibg Mechanism for Suppression of Vibrations
- IEEE 1394
- Digital Visual Interface (DVI) (*2)
- DVD-R/RW Playback (*3)
- DVD+R/RW Playback (*3) CD-R/RW (MP3/Windows Media
Audio/JPEG) Playback (*3)
- Picture CD (Kodak)
- Fuji Color CD
- HDCD Decoder
- Self-illuminated GLO-KEY Remote Controller with
Easy Recognition Layout
- Signal System: NTSC/PAL
- Disc Played: DVD Audio, DVD Video, Super Audio
CD, DVD-R/RW (DVD Video), Video CD, Music CD, CD-R/RW (audio/MP3/WMA/JPEG),
Picture CD (Kodak), Fuji Color CD (Fuji Color)
Video Outputs
2 Sets S-Video Output
Y; 1 Vp-p (with 75 ohms load),
C; 0.3 Vp-p (PAL) (with 75 ohms load)
1 Set RGB Video Output
R: 0.7 Vtt (75 ohm belasting)
G: 0.7 Vtt (75 ohm belasting)
B: 0.7 Vtt (75 ohm belasting)
2 Sets component Video Output: Y,Cb/Pb, Cr/Pr
(RCA & BNC)
Y: 1.0 Vp-p (with 75 ohms load)
Cb/Pb: 0.7 Vp-p (with 75 ohms load)
Cr/Pr: 0.7 Vp-p (with 75 ohms load)
2 Sets composite Video Output: 1 Vp-p (with 75
ohms load)
Audio Section
Audio Outputs
2 Sets Analog Front Channel (FL/FR) Output
1 Set Analog Multi Channel (SL/SR/C/SW/Output)
1 Set Optical Digital Output
1 Set Coaxial Digital Output
1 Set DENON Digital Link
2 Sets IEEE 1394 Connector
Signal-to-noise ratio :120 dB
Dynamic Range : 110 db
Total Harmonic Distortion : 0.0008%
General
Power Supply: AC 230V, 50Hz
Power Consumption : 49 W
Dimensions: 434(W) x 139(H) x 434(D) mm
Weigth: 12.8 kg
(*1) If the source is copyright protected, the DVD player may convert
the digital output
(*2) Due to current standards of the DVD Copy Control
Association made up of DVD-related companies, output of DVD video
images DVI has not yet been approved. The DVI port on this product
at the time of release thus does not function. However, once a standard
has been established, an upgrade will be planned to enbale use of
DVI port. No signal is output when a device with HDCP-compliant
DVI output is connected to a display that does not support HDCP.
A display supporting HDCP must be connected in order to view images
vis DVI.
(*3) Discs that have been poorly finalized following
recording may be only partially playable or not playable at all.
|
